Tag: Run

  • How Long Do You Grill Pork Loin Per Pound?

    [ad_1]

    Introduction

    Whether you are grilling outside on the grill or in the broiler oven, there’s nothing quite as tasty as a grilled pork loin. But if you are inexperienced with cooking this particular cut of pork you may have some questions: How long do you grill pork loin per pound? What grilling techniques should I know about? With what shall I flavor the pork? We will address each of these questions and provide you with insightful tips that will help you make the perfect pork loin dinner for your family.

    Cooking Time — The Short Answer

    The complete answer to the cooking time is a little more involved than simply telling you an amount of time per pound and a temperature to cook this cut of pork and expect it to be done perfectly when the time is up. However, if you were to be given a fairly accurate short answer concerning the cooking time of a pork loin, it would be this: About 22 minutes per pound at about 350 degrees Fahrenheit.

    Please understand that there is more to cooking a pork loin than simply pre-heating a grill or an oven to a certain temperature, set the timer, and expect excellent results. Please allow an explanation that will give a little more information before you run off and set the meat on the grill.

    The Complete Grilling Procedure

    The first thing to do, whether you are cooking on the outdoor grill or in the broiler oven, is to sear each side of the pork loin with high heat. Searing it will help keep in the moisture so you end up with a very tender and juicy cut of pork. Cook the pork loin on direct high heat for about two (2) or three (3) minutes on each side of the pork loin. Sear the lean side first, then the fat side. When turning any meat, do not use a fork as it will puncture the seared surfaces of the meat and allow moisture to escape easily. To preserve the moisture always use a pair of tongs to turn meat.

    — On the Grill:

    I am among many Americans who love the taste of foods cooked on the outdoor grill. And what better meat to cook on the grill than a pork loin? Most people don’t think of cooking a “pork roast” on the grill, and technically a pork loin is a pork roast. But because of its narrow thickness, it is the ideal “pork roast” to cook on the grill.

    When grilling, there are common processes to follow regardless of which kind of grill you have.

    1. Pre-heat the grill for searing.

    2. When grilling on an outdoor grill, turn the meat often to simulate a rotisserie. A pork loin should be turned every few minutes to cook evenly and retain its moisture.

    3. In order to preserve the moisture, always use tongs instead of a fork to turn meat.

    4. Searing meat requires that it is exposed to direct high heat for two (2) or three (3) minutes on each side.

    5. Pieces of meat, such as a pork loin, that are larger than chops or steaks should be cooked on low, indirect heat at around 350 degrees Fahrenheit. If your grill has vents in the lid, cook the pork with the vents open.

    6. A meat thermometer should be used to ensure that the pork loin is between 160-170 degrees Fahrenheit on each end and in the middle. For pork 160 degrees Fahrenheit is medium well and 170 degrees Fahrenheit is well done. Below 160 degrees Fahrenheit you risk food poisoning or worm infection. It is best to check the temperature about 10-15 minutes prior to the completion time so you can make adjustments to the cooking time.

    Once the pork has been seared on each side, follow these instructions for various types of grills…

    • Charcoal Grill: Separate the charcoal into two (2) piles on either side of the grill to allow the pork loin to be laid between them.

    • Gas Grill – Two Elements: Lay a piece of aluminum foil across the middle between the two elements and lay the pork loin on the aluminum foil. Cook on low heat.

    • Gas Grill – Three or More Elements: Turn off the inner elements and allow only the outer two elements to cook on low heat. Lay the pork loin half way between the operating elements.

    — In the Broiler Oven:

    In the cold weather of winter you may not want to do any outdoor grilling. When using a broiler oven you should follow similar procedures as grilling on an outdoor grill. Always use tongs instead of a fork to turn meat. And a meat thermometer should be used to be sure that the pork loin is between 160-170 degrees Fahrenheit on each end and in the middle. For pork 160 degrees Fahrenheit is medium well and 170 degrees Fahrenheit is well done. Below 160 degrees Fahrenheit you risk food poisoning or worm infection. It is best to check the temperature about 10-15 minutes prior to the completion time so you can make adjustments to the cooking time.

    1. Pre-heat the broiler and broiling pan for 15 minutes. If your broiler has multiple heat setting, then set to high broil.

    2. Set the pork loin on the broiling pan fat side up to sear for three (3) minutes.

    3. Turn the pork to fat side down to sear for another three (3) minutes.

    4. Turn off the broiler and turn on the oven. Bake in the oven at 350 degrees Fahrenheit on the broiling pan, fat side down, for the remainder of the time.

    5. Make sure to check the inner temperature with the meat thermometer at both ends and in the middle about 15 minutes prior to completion of cooking time in order to avoid over cooking.

    — Rotisserie Oven:

    Interestingly enough the pork loin will come out more tender and juicy when cooked in a rotisserie than either the outdoor grill or broiler oven. A meat thermometer should still be used to be sure that the pork loin is between 160-170 degrees Fahrenheit on each end and in the middle. For pork 160 degrees Fahrenheit is medium well and 170 degrees Fahrenheit is well done. Below 160 degrees Fahrenheit you risk food poisoning or worm infection. It is best to check the temperature about 10-15 minutes prior to the completion time so you can make adjustments to the cooking time.

    Because the rotisserie cooks meat faster than either the outdoor grill or the broiler oven, you may need to reduce the cooking time to about 18 or 20 minutes per pound. It is still recommended to use a meat thermometer. However, because the rotisserie automatically sears all sides of the meat there is no need to sear the pork.

    Let It Stand

    For juicier, tenderer pork loin, when the pork loin has finished cooking let it stand at room temperature for 10-15 minutes before serving.

    Flavor/Seasoning

    A pork loin can be marinated in your favorite flavor marinade in the refrigerator overnight. You will likely find marinades at any supermarket. If you marinate in the refrigerator overnight, you’ll need to puncture the meat several times to allow the marinade to soak into the meat. Follow the instructions on the package of marinade.

    Many cooks prefer to use a dry seasoning rub. Seasoning your pork loin is as easy as liberally coating with season salt, garlic powder, and pepper, then rubbing the seasoning into the meat. You can also place the seasoned meat into a plastic bag and leave it in the refrigerator overnight.

    There are also injection methods of marinating that would NOT require overnight marinating. In addition to injection marinating, there are also methods of injecting solid objects such as chopped garlic, chopped onions, or chopped pineapple.

    If you prefer sweeter pork, apple sauce or apple butter (or even pineapple puree) can be injected into the meat of the pork loin. Or a slit can be made down the middle of the pork meat and the apple sauce or apple butter (or pineapple) can be inserted and the pork tied with string every one (1) or two (2) inches according to how you will cut the pork loin when it is done cooking.

    Summery

    In this article we have discussed the answers to questions such as: How long do you grill pork loin per pound? What grilling techniques should I know about? How shall I flavor the meat? If grilled properly a pork loin with all the trimmings will make a wonderful and delicious meal that your family will absolutely love.

    [ad_2]

    Source by Michael T. Conway

    Views: 0

  • How to Quickly and Confidently Spot a Fake 1893-S Morgan Silver Dollar

    [ad_1]

    1893-S Morgan silver dollars are so renowned, that more exist today than were originally minted. Most Counterfeit 1893-S Morgans consist of altered versions of existing genuine Morgan dollars.

    The majority of 1893-S Morgan silver dollars are certified, so why would I need to know how to tell a fake one when I see it? Hasn’t NGC and PCGS already done that for me?

    I’ve seen fake 1893-S Morgans both graded and raw. I have to assume PCGS and NGC graders both know how to spot a fake 1893-S Morgan, so when I see an example of a counterfeit slabbed in a legitimate looking holder, I have to figure the holder is as fake as the coin.

    I also run across fake coin denial. Owners of these coins don’t want to admit they were fooled into buying a counterfeit coin. That’s a hard pill to swallow, especially when the owner paid top dollar for a graded coin with the confidence of it being blessed from a major third party grader.

    The 1893-S date/mintmark is the most valuable of the Morgan designed dollars. Because of this, most counterfeit versions have been made by altering either the date, or the mintmark.

    Learning to tell a fake 1893-S Morgan is simple, because ALL 100,000 coins were made from the same obverse die and two reverse dies. That makes the diagnostic really easy.

    They all have the same obverse characteristics and not terribly different reverse characteristics. Any coin that doesn’t possess the telltale diagnostic characteristics is a fake. Learn what to look for, and you can spot a fake raw coin AND a fake graded coin.

    The date is probably the easiest thing to pick out. Unlike other dies from the S, O, or P mints, the date has a flaw and a certain characteristic the altered coins won’t possess.

    First, look closely at the 1. Does it line up exactly with the dentil directly under it? Can you draw a line right through the center of both?

    Next, study the last numeral. As the date progresses, it slopes upward to the right, in relation to the edge. The 3 is noticeably higher than the 1 at the beginning. This is the easiest way to quickly spot a fake.

    There are things to check in the “T” and “R” on LIBERTY, but they would need a microscope to detect. There’s a tiny die scratch in the “T” and a detail that resembles “rabbit ears” in the base of the “R”. ALL genuine 1893-S Morgans have this detail, if you happen to have a microscope check out this diagnostic detail.

    You don’t really need to turn the coin over to make any more diagnostics on it.

    Further diagnostics will only tell you how the alteration was made. The genuine “S” mintmark is clear and rounded. It isn’t a mushy blob. The top serif on the “S” is a vertical line, while the bottom serif is more like a triangle.

    The next mintmark giveaway is the alignment of the “S”. It should be perfectly aligned. I’ve seen the “S” mintmark noticeably slanted, and it shouldn’t be. Also, the “S” is slightly filled in between the upper curve and the slant of the “S” as well as the lower curve and the slant.

    Since most counterfeit 1893-S dollars are altered, continue to study the coin with a 10X glass. Rotate the coin and look for tooling marks around the 9 or 3 for signs of a date alteration on the obverse. Altered coins are usually the 1898-S, 1883-S, or 1893-P.

    As collector values continue to increase with the 1893-S, the fakes will get even better. With emerging technologies, counterfeits will become almost perfect replicas of the original. My hope is that as technologies to accurately copy a coin advance, technologies to detect such copies will also keep up.

    [ad_2]

    Source by Paul St. Julien

    Views: 0

  • Dealing With Emotional Triggers

    [ad_1]

    I write this article because I realized that while going through a tough season in my life and going through the emotional healing process there were moments when out of nowhere something and even someone would say or do something unbeknownst to them that would set me on an emotional spiral because it triggered a negative memory or life moment gripped by strong emotions.

    Once the moment subsided I started wondering what I could do to not be undermined by emotional triggers in my life. It has a lot to do with your thought process which works with your emotions. I have been in the process of healing my soul and crucial to that process was dealing with how I think and how it was effecting my life. For the most part I am positive but a long season of growing pains had created a lot of woundedness in my soul. I made the decision not to see through my wounds anymore and to see from a healthy soul which begins with ridding myself of the negative thoughts that have been bombarding me. To do so I began with prayer and seeking God for the wisdom and solution to deal with the hurt in my soul. Below are the solutions that has and continue to work for me. I am wired to be productive so this is incorporated into my day and what I will do for that day

    1) Pray and get quiet within yourself to hear the answer

    2) Once the answer comes stay committed to the healing process. It will take time to heal in your soul.

    3) Stay Diligent it takes 21 days to establish a new habit, and 90 days to become a way of life.

    4) I listen to and watch positive teaching on thinking and healing my soul daily.

    5) I wake up praying and then listening to teaching on the radio to replace negative thoughts and self talk with faith filled thoughts & words

    6) I Listen to worship music and worship God through song, I also listen to soothing music without lyrics sometimes. This creates an environment of peace conducive for my soul to heal.

    7) On hard days press in harder and don’t stop the healing process.

    8) It is crucial to guard your eyes, ears, and heart.

    9) Negative things do happen and it’s important how you manage your emotional response

    10) Believe in yourself and make the decision to not line up with a negative perspective and choose to see the good

    For example there is a great worship song that was sung at my sisters home going service and on a Sunday in church the song was sung. I began to come unglued emotionally inside but no one around me knew I was struggling and I wanted to run but The Holy Spirit reassured me I will be alright with a comforting peace. I just started saying Hallelujah to calm myself and stay focused on the worship. Till this day I can no longer hear that song but learning how to manage the trigger. My Pastor A. R. Bernard taught us that it will take twelve pieces of positive information to replace one piece of negative information. Yes it is a battle but worth fighting to be free indeed, healed and whole in your soul.

    This sums it up when dealing with Triggers… It’s crucial to Breathe properly to help calm yourself and gather your thoughts to respond and not react to your triggers

    Quote: Take a breath. Pause. Iyanla Vanzant

    [ad_2]

    Source by Jana Hicks

    Views: 0

  • Diagnosing Fibromyalgia: Tests Your Doctor Should Run in the Course of Your Treatment

    [ad_1]

    Fibromyalgia is often missed or misdiagnosed for a number of reasons. There aren’t definitive blood tests or X-ray to diagnose Fibromyalgia and it shares symptoms with many other diseases and conditions.

    Diagnosing Fibromyalgia is a combination of taking the patient’s symptom history, a physical exam testing the Patient’s Trigger Points and exclusion.

    Today I’m going to focus on the exclusion portion of diagnosing Fibromyalgia. Sometimes people are diagnosed with Fibromyalgia because their doctor failed to run the necessary tests to uncover a different, and perhaps serious condition.

    If you feel terrible and are experiencing a variety of symptoms common to Fibromyalgia, you are going to go to your doctor.

    After taking your history, your doctor is going to want to run some tests to begin excluding diseases.

    What Diseases & Conditions Should Your Doctor Test for when Diagnosing Fibromyalgia?

    The following diseases & conditions share some of the symptoms of Fibromyalgia and they should be excluded. Sometimes doctors who aren’t as familiar with Fibromyalgia fail exclude some of these serious and life threatening diseases. You have every right as a patient to ask your doctor to test you for all of the following:

    Diabetes

    Easily tested for with a blood test

    Chronic Fatigue Syndrome

    There isn’t currently a blood test for this condition, however they recently discovered that CFS is caused by an autoimmune virus and I suspect there will be a blood test forthcoming. Talk to your doctor about Chronic Fatigue Syndrome.

    Hepititis B & C

    Easily tested for with a blood test

    Lyme Diseases

    Doctors often overlook Lyme Disease and do not test for it. This is an oversight on their part and you should ask to be tested.

    Lupus

    There isn’t a definitive test for Lupus however your doctor should run a ANTI NUCLEAR ANTIBODY Test. If you have high autoimmune activity in your blood (a trait of Lupus), this test will detect it.

    Multiple Sclerosis

    MS is also difficult to diagnose, however they do use MRI to test for MS. While you shouldn’t run off and get an MRI just yet, talk to your doctor about Multiple Sclerosis.

    Rhuematoid Arthritis

    Easily tested for with a blood test

    Sjogrens Autoimmune Disorder

    Easily tested for with a blood test

    Thyroid Disease

    Most doctors only test your thyroid with a THYROID STIMULATING HORMONE Test. However, you might have a thyroid issue even if your thyroid is functioning properly – I do! Fibromyalgia Patient’s often have thyroid issues in conjunction with Fibromyalgia so running in depth tests is a must. Ask your doctor to run the following tests:

    FREE THYROXINE LEVELS

    T3 and T4

    ANTI THRYOGLOBULIN ANTIBODY

    ANTI THRYOGLOBULIN ANTIBODY

    Other Blood Tests Your Doctor Should Run for a Fibromyalgia Diagnosis:

    CBC: Checks your Complete Blood Count. Looking for issues such as anemia and other diseases.

    COMPREHENSIVE METABOLIC PANEL: Tests your kidney, liver and overall health.

    HEME PROFILE + ELECT DIFF: Checks for unusual activity in your white or red blood cells.

    FOLATE: If not included in your CBC, checks your folate levels.

    SEDIMENTATION RATE: Checks for inflammation in your body

    SERUM PROTEIN ELECTROPHORESIS:Tests for autoimmune diseases

    VITAMIN B12:Checks your B12 levels if not done in your CBC.

    VITAMIN D: Checks your D levels. Vitamin D is the Sunshine Vitamin. Ask your doctor to run the Vitamin D test that checks both your D3 and D2 levels. This is a hot topic because scientists are re-evaluating what they previous believes. Research is showing that while your combined D level is within normal range if your D3 and D2 levels might be individually low and this could be an issue. (My D2 is zero).

    [ad_2]

    Source by Margo Watson

    Views: 0